Bendix Commercial Vehicle Systems SMARTIRE TPMS HAND TOOL MANUAL User Manual
Page 18
Page 18
9. If a sensor failed to activate, this screen will be appear:
If this occurs, ensure that the Tool is placed at the correct position around the tire and
retry the sensor activation by pressing the Learn
button.
10. If, while learning a particular wheel position, a tire pressure sensor ID code is received that is
already used in a different position, this "Duplicate ID" error screen is displayed:
11. Pressing the
button will delete the received ID and the screen will go to the previously
learned position. Press the Learn
button to learn the tire sensor into the position again.
12. Using the programming cable (Part Number K092501), connect the Tool to the TrailerLink
™
by
Bendix CVS system harness. Refer to the TrailerLink system manual for instructions.
13. Press the Check
button to begin downloading the new tire sensor IDs into the TrailerLink
™
by Bendix CVS system receiver.
ECU
HAND
TOOL
REMOVE LED
INSERT
HARNESS