Failure display mode, Fault code chart – Bendix Commercial Vehicle Systems VORAD EVT-300 DRIVER INSTRUCTIONS User Manual
Page 33
Failure Display Mode
Fault Code Chart
Fault Code
Suspect Failure
11
Central Processing Unit
12
Central Processing Unit
13
Driver Display Unit
14
Antenna Assembly
15
Right Side Sensor
16
Left Side Sensor
21
Right Turn Signal
22
Left Turn Signal
23
Brake Input
24
Speed Input
25
SmartCruise Compatibility
31
J-1587
32
J-1939
33
VBUS
34
Driver Display Unit
35
Antenna Assembly
41
No Fault or End of Fault Codes
Report any failures indicated by the Driver Display Unit or Side Sensor Display to
maintenance personnel for service. If the red “FAIL” indicator light comes on while
driving, turn the system off (if available), and do not use until it has been repaired.
Side Sensor failures will illuminate either the red or yellow lights on the Side Sensor
Display. The lights will remain illuminated as long as a failure is detected.
If you have any further questions regarding the Bendix
™
VORAD
®
system, call
1-800-247-2725 in the U.S., Canada, and Mexico; contact your OE dealer in Europe.
29