Bendix Commercial Vehicle Systems VORAD EVT-300 DRIVER INSTRUCTIONS - Manual (Page 6)

Bendix ™ SmartCruise ®
• The Bendix ™ SmartCruise adaptive cruise control system works with
the cruise control feature of your vehicle. Refer to the cruise control
instructions in the Owner’s Manual of the vehicle.
• The SmartCruise system will not react to stationary objects, and it does
not have the capability to bring the vehicle to a stop.
• The SmartCruise system may operate the engine brake without warning.
Do not operate this feature in slippery or wet conditions where sudden
braking could cause loss of control.
2
Note the above warning in your vehicle. It is there to remind you of the safe
use of the SmartCruise system.
If you have any questions regarding the operation of the EVT-300 or SmartCruise,
call 1-800-AIR-BRAKE (1-800-247-2725) in the U.S., Canada, and Mexico; contact
your OE dealer in Europe. Bendix wants you to use your VORAD system safely.
Product Safety Information
WARNING
!
Vehicle is equipped with an Bendix VORAD SmartCruise system which operates
when Cruise Control is on.
Improper use of SmartCruise can lead to a serious accident.
Do not use SmartCruise in:
* slipper y conditions (wet, snow, ice, mud) or fog.
* stop-and-go traffic.
* winding roads.
* any situation where your vehicle manual advises against using Cruise Control.
Check front sensor periodically for alignment and cleaning. Heed all safety
information in your Bendix VORAD manual and truck operator manual
Smar tCruise does not replace an aler t, trained driver!
R
R