Bird Technologies 429-83H-01 Series-Manual - Manual (Page 41)

TX RX Systems Inc. Manual 7-9439-6 09/03/09 Page 33
6) Type in the host IP address. This is the current
address of the TTA (factory default is
192.168.1.1). Type in the port number of 9999,
see Figure A5. Click the OK tab to complete
the TelNet connection.
7) The HyperTerm window will now display a
flashing cursor, see Figure A6. Type in “bird”
using small letters at the password prompt
(“bird” is the factory default password). A
prompt to enter the setup mode will now appear
as shown in Figure A7.
Figure A7: Entering the Setup Mode.
Figure A6: Password Prompt.