Black Box COMPACT T1 - Manual (Page 29)

Compact T1 - Release 6.1 25
Quick Start
Configuration
Set Up the Router (IP or CMG) Cards
See the Router (IP or CMG) Quick Start Guides for detailed information. The following
is the basic setup, see the Router family User Manuals or Quick Start Guides for the
following configuration setups:
l PPP Internet Connection and Public IP Address Routing
l Frame Relay Internet Connection and Public IP Address Routing
l Internet Connection using PPP, NAT/PAT and Firewall Filters
l Internet Connection using NAT and Static NAT Addresses
l PPP Internet Connection and Public IP Address Routing
l Back-to-Back with PPP
Command Description
set {ds0-addr} type data Confirm DS0 is set to type data.
ds0-addr = {slot:port:channel} of DS0
Example: set a:1:1-24 type data
connect {slot:port:trunk}
{slot:port:channel}
Cross-connect T1 to router card.
Example: connect a:1:1-24 6:1:1 (router in slot 6)
set {router-addr} proxy Disable/enable router proxy.
router-addr = {slot:port}| of router card.
Example: set 6:1 proxy disable.
set {slot:port} up Set Router LAN as In-Service.
Example: set 6:1 up
telnet {router_card-addr} Telnet to Router card.
router_card-addr = {slot} location of router card
Example: telnet 6 (if earlier than 3.0 release {slot:port}
must be used)
Local and Remote Profile Setup
reinitialize To enable any configuration changes, the card must be
reinitialized.