Black Box COMPACT T1 - Manual (Page 33)

Compact T1 - Release 6.1 29
Quick Start
Configuration
Upgrade the Controller Software
Use the following commands to determine the system software level, then upgrade the
software to the latest version.
Upgrade the Router (IP or CMG) Software
Use the following commands to determine the Router card software level, then upgrade
the software to the latest version.
Install Country Specific Ringer Tones
Use the following command to load the ringer tone for the location of the Compact T1.
Ringer tones are shipped with the CMG Router software. The default tone is "us.tdb".
Command Description
status equipment Determine the system software level. The
Slot A line (SW Vers) will display the
current software level
load tftp {ip-addr} {"file-
name"} (or load xmodem)
Load the new controller system software.
See the load tftp and load xmodem
command for more information. Note: must
have TFTP running in the background
Command Description
status equipment Determine the Router software level. The
Router Slot line (SW Vers) will display the
current software level
load {router-slot} tftp
{ip-addr} {"file-name"}
Load the new Router software to the Adit
Router card. See the load tftp command for
more information. Note: must have TFTP
running in the background
Command Description
load {cmg_card-addr} tftp
{"tone_file"}
Will load the tone file onto the CMG
card.Note: must have TFTP running in the
background.