Black Box COMPACT T1 - Manual (Page 7)

Compact T1 - Release 6.1 3
Quick Start
Assembly of Compact T1
Assembly of Compact T1
The cards should be positioned in the chassis as follows:
Note: Slots are labeled on the top and the bottom of the chassis.
l Power Supply in the POWER Slot
l T1 Controller in Slot A
l Service Cards can be in any slot 1 through 6.
Note: When an Unit is mounted to the wall, cards that use the front cable
connections should be loaded from Slot 6 to 1. This will minimize card access
issues due to cable interference.
l Always install blank faceplates in any unused slots.
Service Card Slots
1 2 3 4 5 6 A POWER