Bully Dog 81421 Rapid Flow - Manual (Page 6)

5
rAPid FlOW inSTAllATiOn
rapid Flow exhaust # 81421
QUICk OVERVIEw FULL EXHAUST
Muffler
Straight Pipe
CLAMP AND HANGER PLACEMENT
Hanger A
Hanger B
Hanger D
Clamps
Clamps
Hanger C
Tail Pipe Tip
Passenger Front Piece
Tail Pipe
Clamp
In these steps you will install the Rapid Flow Exhaust System. Bully Dog’s Exhaust Systems are one-
cut systems, meaning that you should only have to cut one pipe or less if installed correctly.
1. It is suggested that before installing the system on the truck, the Rapid Flow Exhaust System be laid out on a
large flat surface to acknowledge the location of each piece
Tool s Needed:
Silicone Spray Lubricant •
9/16” Wrench •
7/16” Deep Socket •
Socket Wrench •
Tape Measure •
INSTALLATION OF THE BULLy DOG RAPID FLOw EXHAUST SySTEM
Adapter
Catalytic Converter
Y Pipe
Drivers Side Front
Piece Tail Pipe
Tail Pipe Tip