Bully Dog 81421 Rapid Flow - Manual (Page 7)

6
6
rAPid FlOW inSTAllATiOn
rapid Flow exhaust # 81421
2. Place all of the supplied Hangers into their appropriate
locations as shown. There is a hanger on the Catalytic
converter that will be reused .
7. Install the Adapter on the Catalytic Converter and
secure with one of the supplied Clamps.
8. Install the hanger bracket on the rear of the driver’s
side and hang Hanger C. The hanger bracket will be
secured to the frame of the truck using an existing
hole in the frame. The hole is on the lower part of
the frame as shown.
SwITCH DIRECTIONS: THE NEXT STEPS wILL BE FROM THE BACk OF THE TRUCk
Hang the Hangers
Install Adapter
Hanger Bracket Location