Bully Dog 81421 Rapid Flow - Manual (Page 8)

7
rAPid FlOW inSTAllATiOn
rapid Flow exhaust # 81421
9. Install the Y Pipe by hanging it from Hanger B and
tightening it enough to hold the Y Pipe in place.
10. Install the Tail Pipe Tips by tightening up Hanger C
and D enough to hold the Tail Pipe Tips in place.
11. Install the Muffler by connecting it onto the Y Pipe
and then tightening Hanger B.
Install Front Piece Tail Pipe
Hanger B
Y-Pipe
Connect Muffler to Y Pipe
Hanger C
Passenger Front Piece Tail Pipe
Driver Front Piece Tail Pipe
Muffler
Install Tail Pipe Tip
Tail Pipe Tip
Hanger D