Bully Dog Watchdog - Manual (Page 35)

OperATION
35
Go Back
Speed
Boost
RPM
Coolant
GAUGE SETUP
Gauge 1
Set Gauge 1
Set Gauge 2
Set Gauge 3
Set Gauge 4
Pyro 2
Speed
Boost
Use the Up & Down Arrows
to change the gauge function.
gauge setup: (pgs 35-37)
Enter the Gauge Setup menu to change the vehicle parameters (PIDs) displayed on the four
gauge locations in the Main Screen. See a complete list and description of all of the potential
displayable vehicle parameters on the following page.
Special Note: The WatchDog relies primarily on gathering vehicle information through the
OBD ll port. Earlier model year vehicles generally do not display as many vehicle parameters
as newer model vehicles. Technology advances in later model vehicles have brought more
vehicle sensors and so they are able to broadcast more vehicle parameters that the Watch-
Dog can receive and display. As long as the WatchDog is properly connected to the vehicle,
while browsing the Gauge Setup menu, the WatchDog will only display those parameters
that are available for the vehicle it is installed on.
Notice that upon entering the gauge setup menu that, Set Gauge 1, is highlighted in black. When a gauge location
is selected it is highlighted in black on the left and it also appears above the vehicle parameter selection box.
To highlight a different gauge location to change
the parameter in that gauge location press the se-
lection button that coincides with that gauge loca-
tion. For example select gauge location 1, press the
second button down on the left side of the Watch-
dog. Once the desired gauge location is highlighted
you can scroll through vehicle parameters to set
the desired parameter in that location.
Use the large Up Down Buttons to highlight a
particular vehicle parameter for any of the gauge
locations.