Bully Dog Watchdog - Manual (Page 40)

OperATION
40
0-100 kPH Test:
Selecting 0-100 KPH test will initiate a 0-100 kilometer per hour test which is the equivalent to about
62 miles per hour. This is a standard test that is popular in countries that measure distances in kilome-
ters. The test will appear differently based on the type of Performance Testing style that is selected.
There are two different types of performance tests that can be ran. Those two types of the tests are
displayed below. To select the preferred performance test type select that in the Performance Testing
Setup menu.
Special Note: This 0-100 KPH racing function should only be used on a sanctioned 1/4 mile
drag racing track. Street racing is illegal and extremely unsafe.
• Speed Sensitive Performance Test: Once
initiated this test type will instruct the end user to
first bring the vehicle to a stop. Once the vehicle
is at zero kilometers per hour the WatchDog will
instruct the driver that the test will begin once the
WatchDog detects Speed.
• Race Tree Performance Test: Before initiat-
ing the Race Tree style performance test it is
important that the vehicle should already be at a
complete stop. Once initiated the WatchDog will
display a classic drag race tree on the screen. As
soon as the lights on the drag race tree turn green
the WatchDog will begin to record the vehicles
time. It will not wait to detect speed before it
starts recording.
• Results Screen: Once a complete 1/4 mile has been completed the WatchDog will display the results
screen. If the user wants to save the test so it can be displayed and analyzed on a PC then the run can be
saved to the SD card by immediately going to the Save Test To SD Card Menu.
Go Back PERFORMANCE TEST
TEST STARTS
WHEN VEHICLES READS
SPEED