Bully Dog Watchdog - Manual (Page 61)

UpDATeS
61
seCtiOn 3:
The Update Process
Follow the steps listed below to update the
Watchdog software to the latest version.
1. Plug the Watchdog into a PC that has a high
speed internet and is loaded with the Update
Agent 2.0 using a mini USB cable.
2. Wait for the Update Agent to automatically
recognize the SD card and open the screen
shot below on your computer screen.
3. From this screen there is only one simple
thing to do; press the update button on the right hand side of the screen and the Update
Agent will automatically update the Watchdog software.
4. When the Update Agent
finishes updating the Watch-
dog software the Watchdog
can be remove from the PC
and the USB cable.
5. Reinstall the Watchdog into
the vehicle via the Main Har-
ness and mounting device.
6. Once installed start the
vehicles engine. The Watchdog will light up to display the main screen.
7. Navigate from the main screen > Main Menu > Update Software.
7. Follow the screen prompts to update the Watchdog, do not unplug while performing the
Watchdog update.
8. Once the Update Software function has completed, the WatchDog will have to be set up for
the vehicle like is described in Section 2 of the Operating Instructions.