Calculated Industries 6026 - Manual (Page 12)

12 – Scale Master ® Classic v3.0
Converting Between Scales
The Scale Master Classic can automatically
convert values between scales. For exam-
ple, 20 feet rolled in 1/16” scale will be
converted to 10 feet in 1/8” scale. You
may want to roll a value in one scale and
then add that exact value (unconverted)
in another scale.
1) Roll a value and press [M1+]. Press
[Scale] to change scales.
2) Roll another value and press [M1+].
3) Press [Rcl] [M1+] to recall the combined
total.
Locking Scale Settings
Your Scale Master Classic comes equipped
with a lock switch that prevents inadver-
tently changing drawing scales. When the
lock is activated, a lock symbol will be dis-
played in the LCD. While active, the Scale
and Mode cannot be revised (other than by
removal of the battery).
Using the Counter
You can use the [Subtract/Count] key to
count items such as electrical outlets,
drains, etc.
Press [Mode] until you find the Count
mode. Then press the [Subtract/Count] key
to count the items.
You can use the [M1+] and [M2+] memory
keys to store or accumulate the counts for
two different items. After you have a count
value, press [M1+] or [M2+] to store it.