Cineo Lighting TruColor LS - Manual (Page 3)

3
General Notes
1. Please read through this manual carefully before operating TruColor LS, and keep this
manual for future reference.
2. There are numerous safety instructions and warnings that must be adhered to for your
own safety.
3. TruColor LS is not intended for residential use. It is intended for use in a professional studio.
4. The product must be serviced by a qualified technician.
5. The fixture is rated for indoor use and in a dry environment.
6. The product is not certified for use in hazardous locations.
7. The fixture’s typical operating temperature is 55°C (130°F).
Fixture Set Up
1. Read these safety instructions carefully to ensure fixture and accessories are used safely.
2. Ensure the 28mm Spigot is correctly mounted onto the yoke before rigging.
3. Always use secondary safety cables of suitable length when hanging TruColor LS
lampheads or PSUs.
4. The LS lamphead weighs 4.9 lbs. (2.3 kg) excluding accessories, and the DX450 PSU
weighs 12 lbs. (5.5 kg). The combined weight should be considered when choosing a
suitable safety cable.
5. Safety cables must securely be attached to the designated slots on TruColor LS (detailed on
page 4) and be as short as possible to reduce travel distance if primary hanging accessory
fails.
6. Ensure that the yoke lock is correctly tightened when manipulating TruColor LS in the
required orientation for safety purposes.
7. Ensure TruColor LS is operated within the range of -20 to +50°C (-4 to 122°F)