Cineo Lighting TruColor LS - Manual (Page 9)

9
Warnings, Disclaimers and Warranty
Risk of Electric shock / Risk of Fire
Do not open. To reduce the risk of electric shock, do not remove cover (or back). No user-
serviceable parts inside. Refer servicing to qualified service personnel.
Burning Injuries
Be aware of high temperatures in excess of 50°C inside the lamphead during and after fixture
use. Do not touch the LEDs to avoid burning injuries.
Flammable Materials
Keep flammable materials away from the installation. Insure that the amount of air flow
required for safe operation of the equipment is not compromised. Proper ventilation must be
provided.
ESD and LED’s
LED components used in HS lamphead are ESD (Electro-Static Discharge) sensitive. To
prevent the possibility of destroying LED components do not touch either in operation or while
switched off.
Blue Light Output
Do not bypass the lamphead safety switches that turn off the blue LEDs when phosphor
panels are removed. The light-output intensity may be harmful to human eyes. No UV or IR is
emitted at any time from this fixture.
This Equipment MUST be Grounded
In order to protect against risk of electric shock, the installation should be properly grounded.
Defeating the purpose of the grounding type plug will expose you to the risk of electric shock.
AC Power Cords
Use only a rated IEC Connector. The user is responsible for ensuring power cables are of
adequate condition for each application. If the power cords are damaged, replace them only
with new ones.
Environmental: Disposal of Old Electrical & Electronic Equipment
This product shall not be treated as household waste.