Cineo Lighting Maverick User Manual
Page 10
10
For example, a studio lighting installation is best
configured with the 150 watt power supply and
DMX adapter attached to opposite sides of the
yoke. For portable applications, the BackPak is an
ideal mounting tool for one or two battery plates, or
a battery plate and a 120 watt portable AC adapter.
To remove / install the yoke:
1. Position the yoke 90º to the body of the fixture
2. With a #2 Phillips screwdriver, loosen the (4) mounting screws approximately one revolution
3. Slide yoke out of 80/20 slot
4. Installation is in reverse order
To install / remove the BackPak:
1. Align the attached oval-shaped nuts at the top of the BackPak to the top of the 80/20 slot.
2. Slide the top of the BackPak down so the oval nuts on the bottom can be inserted into the
bottom of the 80/20 slot.
3. Position the BackPak in the desired location.
4. Tighten the #2 Phillips screws to secure the BackPak bracket