Cineo Lighting Maverick User Manual
Page 5
5
Maverick Power Sources
The Maverick fixture features SmartPower™ power control, allowing operation with any 12-
24VDC power source capable of delivering 75 -150 watts. This provides compatibility with a
wide range of battery and AC options. Configuration of SmartPower is covered in detail in the
Advanced Power Setting section of this guide.
Cineo offers the following power accessories for mounting on the either the Maverick yoke
or BackPak™ accessory bracket. Maverick can be used with virtually any nominal 12-24VDC
power source, including camera batteries, car lighter sockets, etc. Adapters and accessory
cables are sold for connection to various power sources, including the following:
900.0095 120w portable AC Adapter
900.0195 150w studio power supply
900.0086 V-Lock Battery Plate
900.0094 Gold-Mount Plate
903.0003 Maverick Cigar Lighter Cable
Input power from other sources is also possible, using an XLR4 connector with the following
pin configuration:
• Pin1 – GND
• Pin2 – NC
• Pin3 – NC
• Pin4 - +VDC