BOXLIGHT CP-320t - Manual (Page 15)

15
BEFORE OPERATION
To insure safe operation, please observe the following precautions :
● Use (2) AA, UM3 or R06 type alkaline batteries.
● Replace two batteries at the same time.
● Do not use a new battery with a used battery.
● Avoid contact with water or liquid.
● Do not expose the Remote Control to moisture, or heat.
● Do not drop the Remote Control.
● If a battery has leaked on Remote Control, carefully wipe case clean and install new batteries.
● Risk of explosion if battery is replaced by an incorrect type.
● Dispose of used batteries according to the instructions.
Press lid down-
ward and slide it.
Remove the battery
compartment lid. Slide the batteries
into compartment. Replace the compartment lid.
Two AA size batteries
For correct polarity (+ and
–), be sure battery
terminals are in contact
with pins in compartment.
REMOTE CONTROL BATTERIES INSTALLATION
1 2 3
Operating Range
Point the Remote Control toward
projector (Infrared Remote
Receiver) whenever pressing any
button. Maximum operating
range for Remote Control is about
16.4’ (5m) and 60° in front and
rear of the projector.
16.4’
(5 m)
60°
16.4’
(5 m)
Used to operate P-TIMER
function. (P21)
LOCK
FREEZE
SELECT
D.ZOOM
MUTE
VOLUME-
MENU
NO SHOW
IMAGE
VOLUME+
KEYSTONE
LASER
P-TIMER
ZOOM
COMPUTER
VIDEO
FOCUS
AUTO PC ON-OFF
P-TIMER BUTTON
Used to adjust zoom. (P20)
ZOOM BUTTON
NO SHOW BUTTON
Used to turn the picture
into black image. (P21)
D.ZOOM BUTTON
Used to select DIGITAL
ZOOM +/– mode and
resize image. (P30)
FREEZE BUTTON
Used to freeze the picture.
(P20)
60°
MENU BUTTON
Used to open or close the
On-screen menu. (p17,
18)
COMPUTER BUTTON
Used to select input source
(COMPUTER 1 or
COMPUTER 2).
(P22)
SELECT BUTTON
Used to execute the item
selected, or to expand or
compress image in
DIGITAL ZOOM +/- mode.
(P30)
POINT (VOLUME +/-)
BUTTONS
Used to select an item or
adjust value in ON-
SCREEN MENU. They are
also used to pan image in
DIGITAL ZOOM +/- mode.
(P30)
POINT LEFT/RIGHT
buttons are also used as
VOLUME +/- buttons.
(P21)
VIDEO BUTTON
Used to select input
source (VIDEO). (P31)