BOXLIGHT CP-320t - Manual (Page 7)

7
PREPARATION
NAME OF EACH PART OF PROJECTOR
BOTTOM
BACK
CAUTION
Hot air is exhausted from the exhaust
vents. When using or installing the
projector, the following precautions
should be taken.
● Do not put any flammable objects near
these vents.
● Keep front grills at least 3’(1m) away
from any objects, especially heat-
sensitive objects.
● Do not touch this area, especially
screws and metallic part. This area will
become hot while the projector is used.
This projector detects internal
temperature and will automatically
adjust the speed of the Cooling Fans.
FRONT
This projector is equipped with Cooling
Fans for protection from overheating.
Pay attention to the following to ensure
proper ventilation and avoid a possible
risk of fire and malfunction.
● Do not cover vent slots.
● Keep back and bottom clear of any
object. Obstructions may block
cooling air.
PROJECTION LENS LENS COVER
EXHAUST VENTS
INFRARED
REMOTE RECEIVER
CARRY HANDLE
SPEAKER
INFRARED
REMOTE RECEIVER
POWER CORD CONNECTOR
TERMINALS
AND CONNECTORS
TOP CONTROLS
AND INDICATORS
LAMP COVER
ADJUSTABLE FEET
AND
FEET LOCK LATCHES
AIR FILTER
AIR INTAKE VENTS
(Back and Bottom)