BOXLIGHT CP-320t - Manual (Page 20)

20
Press the FREEZE button on the Remote Control to freeze the picture
on-screen. To cancel the FREEZE function, press the FREEZE button
again or press any other button.
PICTURE FREEZE FUNCTION
KEYSTONE ADJUSTMENT
1 Press the KEYSTONE button on the Remote Control or select
Keystone on the SETTING menu. (Refer to page 36.) The
Keystone dialog box appears.
2 Correct keystone distortion by pressing the POINT UP/DOWN
button(s) on the Top Control or on the Remote Control. Press
the POINT UP button to reduce the upper part of the image, and
press the POINT DOWN button to reduce the lower part.
If the projected picture has keystone distortion, correct the image with KEYSTONE adjustment.
BASIC OPERATION
ADJUSTING SCREEN
The message disappears after 4 seconds.
The message disappears after 4 seconds.
Zoom
Focus
ZOOM ADJUSTMENT
FOCUS ADJUSTMENT
1 Press the ZOOM button on the Top Control or the ZOOM ▲/▼
button on Remote Control. The message “Zoom” is displayed.
2 Press the ZOOM ▲ button or POINT UP button to make image
larger, and press the ZOOM ▼ button or the POINT DOWN
button to make image smaller.
1 Press the FOCUS button on the Top Control or the FOCUS ▲/▼
button on the Remote Control. The message “Focus” is
displayed.
2 Adjust focus of image by pressing the FOCUS ▲/▼ button or
the POINT UP/DOWN button(s) .
• The arrows are white when there is no
correction.
• The arrow disappears at the maximum
correction.
• The direction of the arrow being corrected turns
red.
• If you press the KEYSTONE button on the
Remote Control once more while the keystone
dialog box is being displayed, the keystone
adjustment will be canceled.
Reduce the upper width
with the POINT UP button. Reduce the lower width with
the POINT DOWN button.