Buick 2009 Enclave - Manual (Page 171)

r
(Set/Reset)*: Press this button to set or reset
certain functions and to turn off or acknowledge
messages on the DIC.
4 (Option)*: Press this button to display the units,
language, personalization, compass zone, and compass
calibration. See DIC Vehicle Personalization on
page 3-74 and DIC Compass (Uplevel Only) on
page 3-54 for more information.
t
(Traction Control): Press this button to turn
traction control on or off. See Traction Control
System (TCS) on page 4-7 for more information.
Press and hold this button to turn StabiliTrak ® off,
for vehicles with this feature. Press this button again
to turn both traction control and StabiliTrak
® on. See
StabiliTrak ® System on page 4-6 for more information.
| (Hazard): Press this button to turn the hazard
warning flashers on and off. See Hazard Warning
Flashers on page 3-6 for more information.
*These buttons are only available on vehicles with the
uplevel DIC.
**This button is only available on vehicles with the base
level DIC.
Trip/Odometer Menu Items
TRIP/ODO (Trip Odometer): Press this button to scroll
through the following menu items:
Odometer
Press the trip/odometer button until the odometer
displays. This mode shows the distance the vehicle
has been driven in either miles or kilometers.
Trip A and Trip B
Press the trip/odometer button until A or B displays.
This mode shows the current distance traveled in either
miles or kilometers since the last reset for each trip
odometer. Both trip odometers can be used at the
same time.
The display will show the odometer on the top line and
the trip odometer information, either A or B, on the
bottom line.
Each trip odometer can be reset to zero separately by
briefly pressing the set/reset button on vehicles with the
uplevel DIC or by briefly pressing and holding the trip
odometer button on vehicles with the base level
DIC while the desired trip odometer is displayed.
3-49