Bluetooth, Voice recognition – Buick 2009 Enclave User Manual

Page 221

Advertising
background image

No Info: No artist, song title, category, or text
information is available at this time on this channel.
The system is working properly.

Not Found: There are no channels available for the
selected category. The system is working properly.

XM Locked: The XM receiver in the vehicle may
have previously been in another vehicle. For security
purposes, XM receivers cannot be swapped between
vehicles. If this message is received after having
the vehicle serviced, check with your dealer/retailer.

Radio ID: If tuned to channel 0, this message will
alternate with the XM Radio 8 digit radio ID label.
This label is needed to activate the service.

Unknown: If this message is received when tuned
to channel 0, there may be a receiver fault. Consult
with your dealer/retailer.

Chk XMRcvr: If this message does not clear within a
short period of time, the receiver may have a fault.
Consult with your dealer/retailer.

Bluetooth

®

Vehicles with a Bluetooth system can use a Bluetooth
capable cell phone with a Hands Free Profile to make and
receive phone calls. The system can be used while the
key is in ON/RUN or ACC/ACCESSORY position. The
range of the Bluetooth system can be up to 30 ft. (9.1 m).
Not all phones support all functions, and not all phones
are guaranteed to work with the in-vehicle Bluetooth
system. See gm.com/bluetooth for more information
on compatible phones.

Voice Recognition

The Bluetooth system uses voice recognition to interpret
voice commands to dial phone numbers and name tags.

Noise: Keep interior noise levels to a minimum. The
system may not recognize voice commands if there is
too much background noise.

When to Speak: A short tone sounds after the system
responds indicating when it is waiting for a voice
command. Wait until the tone and then speak.

How to Speak: Speak clearly in a calm and
natural voice.

3-99

Advertising