Low washer fluid, Oil level low add oil, Parking brake on – Buick 2009 Enclave User Manual

Page 186

Advertising
background image

LOW WASHER FLUID

This message displays when the windshield washer
fluid is low. Fill the windshield washer reservoir as soon
as possible. See Engine Compartment Overview on
page 5-12
for the location of the windshield washer
reservoir. Also, see Windshield Washer Fluid on
page 5-35
for more information.

This message displays and a chime sounds only when
the ignition is in ON/RUN. Press any of the DIC buttons
to acknowledge this message and to clear it from the
screen.

This message continues to display for two seconds
if it has not been acknowledged when the engine
is turned off. It also re-displays for two seconds if the
message has been acknowledged, but the condition
still exists when the engine is turned off.

If the condition still exists, the message re-appears
when the engine is turned on.

OIL LEVEL LOW ADD OIL

On some vehicles, this message displays when the
vehicle’s engine oil is low. Fill the oil to the proper
level as soon as possible. See Engine Compartment
Overview
on page 5-12 for the engine oil fill location.
Also, see Engine Oil on page 5-15 for information on
the kind of oil to use and the proper oil level.

PARKING BRAKE ON

This message displays to alert the driver when the
vehicle’s parking brake is on, the ignition is in ON/RUN,
and the vehicle speed is greater than 5 mph (8 km/h).
Release the parking brake before driving. See Parking
Brake
on page 2-29 for more information.

The brake system warning light also appears on the
instrument panel cluster when this message appears
on the DIC. See Brake System Warning Light on
page 3-35
.

A chime sounds continuously while this message is
displayed if driving above 5 mph (8 km/h). Press any
of the DIC buttons to acknowledge this message and
to clear it from the screen.

This message continues to display for two seconds
if it has not been acknowledged when the engine
is turned off. It also re-displays for two seconds if the
message has been acknowledged, but the condition
still exists when the engine is turned off.

If the condition still exists, the message re-appears
when the engine is turned on.

3-64

Advertising