Buick 2009 Enclave - Manual (Page 212)

Playing a Specific Loaded CD
For every CD loaded, a number displays. To play a
specific CD, press the numbered pushbutton that
corresponds to the CD. A small bar appears under
the CD number that is playing and the track number
displays.
Z (Eject): Press to eject CD(s).
To eject the CD that is currently playing, press and
release.
To eject multiple CDs:
1. Press and hold the Z button for two seconds.
The radio beeps once and the indicator light,
located to the right of the slot, begins to flash
and EJECT ALL displays.
2. Once the light stops flashing, REMOVE CD #
displays. The CD ejects and can be removed.
Once the CD is removed, the indicator light begins
flashing again and another CD ejects.
To stop ejecting the CDs, press the LOAD or
the
Z button.
If the CD is not removed, after 25 seconds, the CD is
automatically pulled back into the player. If a CD is
pushed back into the player, before the 25 second time
period is complete, the player senses an error and
tries to eject the CD several times before stopping.
Do not repeatedly press the Z button to eject a CD
after trying to push it in manually. The player’s 25-second
eject timer resets at each press of the eject button,
causing the player to not eject the CD until the 25-second
time period has elapsed.
1 s (Reverse): Press to reverse within the current
track.
2 \ (Fast Forward): Press to fast forward within the
current track.
3
N
(Repeat): Depending on the radio, press to
hear a track over again. REPEAT TRACK displays.
The current track continues to repeat.
For the radio with a Six-Disc CD player, press to repeat
one track or an entire CD.
3-90