Brocade Communications Systems Brocade Network OS 2.1 - Manual (Page 13)

Network OS Documentation Update 3
53-1002606-06
Chapter 9, FIPS Support
1
}
Or
group = <usergroup> {
default service = permit
service = exec {
priv-lvl=15
optional brcd-role = admin
}
}
user = <username> {
Member = <usergroup>
}
Add the following note to the section “Adding a RADIUS server” on page 87:
NOTE
The maximum supported length for the RADIUS hostname is 40 characters.
Add the following note to the section “Changing a RADIUS server” on page 87:
NOTE
The maximum supported length for the RADIUS hostname is 40 characters.
Add the following note to the section “Adding a TACACS+ server” on page 87:
NOTE
The maximum supported length for the TACACS+ hostname is 40 characters.
Add the following note to the section “Changing a TACACS+ server” on page 87:
NOTE
The maximum supported length for the TACACS+ hostname is 40 characters.
Chapter 9, FIPS Support
Add the following note to the section “Setting up LDAP for FIPS-compliant state” on page 110:
NOTE
The maximum supported length for the LDAP hostname is 40 characters.
Chapter 15, Configuration Management
Update the section “Setting interface parameters on a port” on page 176 to read as follows:
Perform this procedure for every port you want to be monitored by ELD.