Brocade Communications Systems Brocade Network OS 2.1 - Manual (Page 22)

12 Network OS Documentation Update
53-1002606-06
lldp dcbx-version
2
lldp dcbx-version
Specifies which version of the Data Center Bridging Exchange (DCBX) protocol to use.
Synopsis lldp dcbx-version {auto | cee}
Operands auto Specifies to auto adjust the DCBX protocol version to accommodate the
difference when a switch interacts with different vendors using a different
version of the DCBX protocol.
cee Specifies to use the Converged Enhanced Ethernet (CEE) DCBX version.
Defaults The default is auto.
Command
Modes
Interface configuration mode
Description Use this command to specify which version of the DCBX protocol to use.
Usage
Guidelines
None
Examples To specify which DCBX version to use:
switch(conf-if-te-0/1)# lldp dcbx-version cee
See Also None