Brocade Communications Systems Brocade Network OS 2.1 - Manual (Page 26)

16 Network OS Documentation Update
53-1002606-06
show dpod
2
show dpod
Displays Dynamic Ports on Demand (POD) license information.
Synopsis show dpod [rbridge-id | all]
Operands rbridge-id Executes the command on the remote switch specified by the RBridge ID.
all Executes the command on all switches in the cluster.
Defaults Executes the command on the local switch.
Command
Modes
Privileged EXEC mode
Description Use this command to display Dynamic POD license information for the local switch.
Usage
Guidelines
The Brocade VDX 6710 and the Brocade VDX 8700 do not support Dynamic PODs.
Examples To display Dynamic POD assignment information:
switch# show dpod all
The cluster has 2 switches
rbridge-id: 1
24 ports are available in this switch
1 POD license is installed
Dynamic POD method is in use
24 port assignments are provisioned for use in this switch:
16 port assignments are provisioned by the base switch license
8 port assignments are provisioned by the first POD license
* 0 more assignments are added if the second POD license is installed
21 ports are assigned to installed licenses:
16 ports are assigned to the base switch license
5 ports are assigned to the first POD license
Ports assigned to the base switch license:
Te 1/0/1, Te 1/0/10, Te 1/0/11, Te 1/0/12, Te 1/0/13, Te 1/0/14, Te 1/0/15,
Te 1/0/16, Te 1/0/17, Te 1/0/18, Te 1/0/19, Te 1/0/20, Te 1/0/21, Te 1/0/22, Te
1/0/23, Te 1/0/24
Ports assigned to the first POD license:
Te 1/0/5, Te 1/0/6, Te 1/0/7, Te 1/0/8, Te 1/0/9
Ports assigned to the second POD license:
None
Ports not assigned to a license:
Te 1/0/2, Te 1/0/3, Te 1/0/4
3 license reservations are still available for use by unassigned ports
rbridge-id: 2
(output truncated)
See Also dpod