Clearaudio DOUBLE MATRIX PROFESSIONAL - Manual (Page 12)

Double Matrix
Professional
User manual
Page 12  clearaudio electronic GmbH 2013
5.3 Vacuum drying
6. To achieve a perfect result, proper vacuuming is necessary. Press the ‘VACUUM’ button to start the
vacuum drying process.
7. When the record is dry always switch off the vacuum first, then pull the upper cleaning arm upwards
and swing it back to the left to its rest position.
Finally stop the platter using the ‘POWER’ button.
Important!
The cleaning arm should always be placed back in its rest before stopping the platter.
After vacuum drying never change the platter direction.
8. Position the antistatic brush over the record by lifting the brush up and swinging it towards the
record. Let the platter turn for at least one more complete revolution.
You should perform this procedure after every cleaning process.
After the antistatic procedure place the antistatic brush back in its rest position and switch off the
platter.
Never use the antistatic brush when the record is wet!
Now remove the record and enjoy a cleaner window to the music
.
5.3 Further care instructions
1. Never use the antistatic brush on wet records.
2. Dust and dirt will build up on the microfiber strips and should be removed after every use.
We recommend using a clean and soft cloth.
3. Please change the microfiber strips at regular intervals, especially if you use the machine very often.