Clearaudio DOUBLE MATRIX PROFESSIONAL - Manual (Page 9)

Double Matrix
Professional
User manual
Page 9  clearaudio electronic GmbH 2013
POWER = Starts and stops the Double Matrix Professional
LIQUID = Automatically applies fluid via the washing arms
PLATTER = Clockwise / counter-clockwise rotation of the platter
PLATTER SPEED = Continuously variable speed regulation of the platter for selective cleaning
VACUUM = Activate the removal of the fluid
4
Upper and lower cleaning arms
The upper and the lower cleaning arms perform the functions of applying the cleaning fluid, cleaning
and vacuum drying. When the upper cleaning arm is in its working position (pic. 9) there is a constant
pressure on the record. In the rest position (pic. 8) the upper and the lower cleaning arms are
automatically retracted from the record. The upper cleaning arm (pic. 10) can be rotated 90°. The
lower cleaning arm cannot be moved. The magnetic mechanism automatically raises the lower arm to
the operating position when the upper arm is swung into operating position above it.
On each side of the lower cleaning arm (pic. 10) are the fluid drains. These provide built-in protection
against spillage if too much fluid is used while cleaning. Excess fluid will automatically run through the
blue tube back into the reservoir.
Pic. 9:Working position
top arm 90°
movable
Pic. 8: Rest position