Clearaudio DOUBLE MATRIX PROFESSIONAL - Manual (Page 6)

Double Matrix
Professional
User manual
Page 6  clearaudio electronic GmbH 2013
3. Set up
Place the Double Matrix Professional on a stable surface such as a table or rack. Please note that due
to the weight of the Double Matrix Professional it could damage soft surfaces, or through movement of
the Double Matrix Professional the surface could suffer scratches. Please make sure that the surface is
able to withstand temperatures of up to 60°C.
3.1 Connecting the mains power
Connect the supplied power cord first to the IEC connector at the rear panel of the Double Matrix
Professional then connect it to the power outlet. Please make sure that the appropriate
connector is used and that the voltage is correct. Please refer to the type sticker next to the IEC
connection.
The best results will be achieved when the Double Matrix Professional is used in a room temperature of
between 15°C and 30°C.
3.2 Switch On
Next to the IEC connector is the mains power switch (pic. 4). When the unit is switched on the red
light of the switch is illuminated.
Make sure that the appropriate connector is used and that the voltage is correct!
Now your Double Matrix Professional is ready to be used.
Before use please finish reading the complete user manual!
Pic.3: Rear view Pic.4: Connection