Clearaudio DOUBLE MATRIX PROFESSIONAL - Manual (Page 8)

Double Matrix
Professional
User manual
Page 8  clearaudio electronic GmbH 2013
2
Antistatic brush
The antistatic brush (Pic. 6) is used to discharge any electrical charge that may be present or that is
generated while cleaning. After vacuuming make sure that the record surface is completely dry then
place the antistatic brush in position by rotating it clockwise (towards the record). Leave it in place for
at least one complete revolution.
This Function can be used to remove static even if you did not clean the record.
If the carbonfiber brush hairs do not make good contact with the record surface use a comb to put the
carbon hairs back in position.
3
Operational controls
Pic.6: Use of Antistatic brush
Pic. 7: Operational controls