ClearCube C/Port & MVX - Manual (Page 30)

20 • C/Port Installation
C7420 Fiber C/Port Installation
ClearCube C7420 Fiber C/Ports connect to ClearCube A1410 and R1350 PC blades to provide
the following features:
•
LC fiber optic connector
• Support for one or two independently–configurable monitors
• PC–over–IP™ (PCoIP™), delivering PC video and audio over your IP network
• Four USB 1.1 ports
• HD audio in and audio out
Setting up the C7420 Fiber C/Port
1. Place your C7420 on a desk or use the included mounting bracket to mount the C7420.
2. Connect the following to the C7420:
– A USB keyboard and pointing device using the front or rear USB ports.
– An LC–SC fiber cable to the LC jack on the rear of the C7420.
– A monitor cable to each DVI-I port on the rear of the C7420.
– The power adapter supplied with the C7420.
3. Connect the SC connector end of the LC–SC fiber cable to the F6150–160 fiber
transceiver. Ensure that the F6150–160 is set up correctly (see F6150 User Guide and
Quick Start Guide for more information).
4. Ensure that you have connected the power cable and AC adaptor provided with your
C7420. Connect the AC adapter to the C7420, and then connect the power cable to a power
outlet. Briefly press and hold the power button to power on the C7420.
USB 1.1 Ports Power Indicator LED Link Indicator Power Button
Front
Rear
USB 1.1
Ports
Audio In Audio Out DVI–I Port 1 DVI–I Port 2
Power
Connector
LC Fiber
Remote Blade
Power Button
Fiber
Activity