Tab. see, Figure 20 – ClearCube C/Port & MVX User Manual
Page 42
Advertising
32 •
MVX Installation
8. On the side window, click ClearView.
shows the resulting screen and the
default 1x1 display configuration.
9. In the Select Display Configuration menu, select the configuration that matches the
physical layout of the monitors and click Apply. The recommended Preferred Display
Refresh rate is 3x.
Note: Selecting a display configuration of 1x1 automatically enables the built-in Clone Mode
functionality. In Clone Mode, all monitors connected to the MVX display the same
video image, including the startup BIOS screens.
Figure 20. Quadro NVS Tab
Figure 21. Default 1x1 Monitor Configuration
Advertising