ClearCube C/Port & MVX - Manual (Page 44)

34 • MVX Installation
optimized for use with ClearCube Multi-Video equipment. Individual settings can be
changed if desired.
14. Continue with the remaining screens to customize desktop and user interface options.
Important Notes about MVX
The LED indicator on the front bezel of the MVX provides useful link status information. A
green status light indicates the MVX is receiving a good video output signal from the C/Port.
A red status light indicates the MVX is receiving no video signal or an invalid video signal
from the C/Port.
Note: An MVX connected to a blade that is powered down, or to monitors that have been
powered down by Energy Star settings, will show a red status light since no video
signal is being sent from the computer.
Some applications may be limited to functioning only on a single display under ClearView
(e.g., RealAudio only displays video on the primary display without modification of the
registry). This is because the application may not be “multi-head” aware and capable of fully
utilizing the Windows built-in multi-video framework.
To change display orientation, go to Display Properties Æ Settings Æ Advanced then select
the Quadro NVS tab. On the side window, select ClearView.
To change the refresh rate for the monitors:
1. Go to Display Settings and click the Advanced button.
2. Change the refresh rate on the Default monitor using the Monitor tab. This adjusts the
refresh rate for all the monitors connected to the MVX.
This behavior about the MVX should be noted.
• When changing color switch settings on the C/Port, the video flickers to black briefly after
each dial movement, as the video signal must be recaptured.
Figure 24. Profiles Screen