Decimator Design DMON-6S - Manual (Page 7)

DMON‐6S Hardware Manual for Firmware Version 1.1
Copyright © 2014 Decimator Design Pty Ltd, Sydney, Australia
7
1. Routing / Window 1 Source (Parameter)
This is the input source for Window 1.
When the sub menu is highlighted, press the ENTER button to enter this sub‐menu.
Press the < and > buttons to move left or right through the following sources:
1.) Input 1 (default for Window 1)
2.) Input 2 (default for Window 2)
3.) Input 3 (default for Window 3)
4.) Input 4 (default for Window 4)
5.) Input 5 (default for Window 5)
6.) Input 6 (default for Window 6)
Please note that Windows 1 to 6 sources are the same as above.
Colours: (Has SUB‐MENUs)
Colours
Background Color
Black
Main Menu <==
Sub Menu
Parameter Window
When highlighted in the Main Menu, press the ENTER button to enter this sub‐menu.
Press the < and > buttons to move left or right respectively through the 10 menus below and press the BACK
button to go back to the Main Menu when finished.
The current value for each Sub Menu is shown in the Parameter Window.
1. Colours / Background Colour (Parameter)
This is background colour for the Multi‐Viewer.
When the sub menu is highlighted, press the ENTER button to enter this sub‐menu.
Press the < and > buttons to move left or right through the following colours:
1.) Black
2.) Blue
3.) Green
4.) Cyan
5.) Red
6.) Magenta
7.) Yellow
8.) White
2. Colours / Border Colour (Parameter)
This is border colour for the Multi‐Viewer.
When the sub menu is highlighted, press the ENTER button to enter this sub‐menu.
Press the < and > buttons to move left or right through the following colours:
1.) Black
2.) Blue
3.) Green
4.) Cyan
5.) Red
6.) Magenta
7.) Yellow
8.) White