2 connecting a reference electrode, 3 connecting a polarizable electrode, Connecting a reference electrode – Metrohm 907 Titrando User Manual
Page 37: Connecting a polarizable electrode, Figure 14, Figure 15
Advertising
■■■■■■■■■■■■■■■■■■■■■■
3 Installation
907 Titrando
■■■■■■■■
29
3.6.2
Connecting a reference electrode
Connect the reference electrode as follows:
1 Plug the electrode plug into the Ref. socket of the 907 Titrando.
Figure 14
Connecting a reference electrode
3.6.3
Connecting a polarizable electrode
Connect the polarizable electrode as follows:
1 Plug the electrode plug into the Pol. socket of the 907 Titrando.
Figure 15
Connecting a polarizable electrode
NOTE
The electrode cable is protected against accidental disconnection
of the cable by means of a pull-out protection. If you wish to pull
out the plug again, you will first need to pull back the outer plug
sleeve.
Advertising