Metrohm 805 Dosimat - Manual (Page 9)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 1 Introduction
805 Dosimat ￭￭￭￭￭￭￭￭ 1
1 Introduction
The 805 Dosimat is a versatile dosing drive which can be used with a number
of different Metrohm devices (e.g. Titrando or sample changer). The 805
Dosimat and the corresponding 806 Exchange Unit are suitable as a buret
not only for simply dosing auxiliary solutions but also for titrations.
1.1 Instrument description
Thanks to various 806 Exchange Units with 1, 5, 10, 20 or 50 mL dosing
cylinders, the 805 Dosimat is suitable for flexible use as a buret (dosing unit
and drive). Older exchange units (without data chip) can also be used.
The exchange units can be set up on the Dosimat and also removed again
in one easy manual step.
1.2 About the documentation
Caution
Please read through this documentation carefully before putting the
instrument into operation. The documentation contains information and
warnings which the user must follow in order to ensure safe operation of
the instrument.
1.2.1 Symbols and conventions
The following symbols and styles are used in this documentation:
Cross-reference to figure legend
The first number refers to the figure number, the sec-
ond to the instrument part in the figure.
Instruction step
Carry out these steps in the sequence shown.
Warning
This symbol draws attention to a possible life hazard
or risk of injury.
Warning
This symbol draws attention to a possible hazard due
to electrical current.