17 connecting the instrument to the power supply – Metrohm 940 Professional IC Vario ONE/ChS User Manual

Page 50

Advertising
background image

3.17 Connecting the instrument to the power supply

■■■■■■■■■■■■■■■■■■■■■■

42

■■■■■■■■

940 Professional IC Vario ONE/ChS (2.940.1200)

3.17

Connecting the instrument to the power supply

WARNING

The power supply unit must not get wet. Protect it from liquids.

The power supply cable is three-core and provided with a plug with
grounding. If another plug has to be mounted, the yellow/green conduc-
tor (IEC standard) must be connected to the protective ground (protection
class I).

Accessories

For this step you need the following accessories:

For Switzerland, …: Power supply cable with IEC 60320 line socket,
type C13, with SEV 1011 plug, type 12 (6.2122.020), 1.5 m

For Germany, …: Power supply cable with IEC 60320 line socket, type
C13, with CEE 7 plug, type VII (6.2122.040), 1.5 m

For the USA, …: Power supply cable with IEC 60320 line socket, type
C13, with NEMA 5-15 plug, type 498 (6.2122.070), 1.5 m

Connecting the power supply cable

1 Inserting the power supply cable

Insert the power supply cable into the instrument's power socket.

Connect the power supply cable to the power supply.

2 Switching on the instrument

Switch on the instrument using the power switch.

Advertising