3 operation, 1 making new connections or editing existing ones, Operation – Metrohm 847 Lab Link User Manual
Page 28
3 Operation
3 Operation
3.1 Making new connections or editing existing
ones
New connections to Lab Link devices must only be made explicitly at the Lab
Link server when
•
Your network does not support Multicast, or
•
You want to deactivate the option Auto connect (via multicast)
(see p. 27).
A connection between a configured 847 USB Lab Link and the Lab Link
Server via a "Multicast enabled" network is established automatically. This
means that alterations to the existing connection settings can only be made
when the device is connected.
Under Connection you can create new Lab Link connections or edit existing
ones.
Note
After you have created a new connection at the Lab Link Server you must
restart the corresponding Titrando system, i.e. switch off the Touch Control
and switch it on again after a few seconds.
1. To create a new Lab Link connection select Connection / New, or Con-
nection / Edit to change the settings of an existing connection.
24
847 USB Lab Link / Lab Link Server