3 parts and controls, 4 safety information, 1 electrical safety – Metrohm 847 Lab Link User Manual
Page 9: 3 parts and controls 1.4 safety information
1
Introduction
1.3 Parts and controls
2
1
3
4
Fig. 2 Front view 847 USB Lab Link
1
LED "Power" Display
Lit up when power supply of the 847
USB Lab Link, via Titrando, is suffi-
cient (exception: with USB hub, see
p. 16)
3 RJ45 network connection (Ethernet)
Connection to network (10 Mbit/s)
2
LED "Status" Display
Blinks irregularly during data transfer
4 USB connection
USB-Port (type B), connection to Ti-
trando
1.4 Safety information
Warning!
This instrument should only be used in accordance with the information
given in these instructions for Use.
1.4.1 Electrical safety
Please observe the following guidelines:
•
Do not open the 847 USB Lab Link housing. This could destroy the
device. Inside the housing there are no components that the user
can service or exchange.
Electrical safety when handling the 847 USB Lab Link is guaranteed within
the framework of the EN/IEC 61010-4 and EN 55022 standards.
847 USB Lab Link / Lab Link Server
5