3 warranty and conformity, 1 warranty – Metrohm 847 Lab Link User Manual

Page 45

Advertising
background image

5

Appendix

5.3 Warranty and conformity

5.3.1 Warranty

The warranty on our products is limited to defects that are traceable to mate-

rial, construction or manufacturing error which occur within 12 months from

the day of delivery. In this case the defects will be rectified in our workshops

free of charge. Transport costs are to be paid by the customer.

For day and night operation the warranty is limited to 6 months.

Glass breakage in the case of electrodes or other parts is not covered by the

warranty. Checks which are not a result of material or manufacturing faults

are also charged during the warranty period. For parts from outside manu-

facturers, insofar as these constitute an appreciable part of our instrument,

the warranty stipulations of the manufacturer in question apply.

With the regard to the guarantee of accuracy the technical specifications in

the instruction manual are authoritative.

Concerning defects in materials, construction or design as well as the ab-

sence of guaranteed features the purchaser has no rights or claims except

those mentioned above.

If damage of the packaging is evident on receipt of a consignment or if the

goods show signs of transport damage after unpacking, the carrier must be

informed immediately and a written damage report demanded. Lack of an

official damage report releases Metrohm from any liability to pay compensa-

tion.

If any instruments and parts have to be returned then the original pack-aging

should be used if at all possible. This applies above all to instruments and

electrodes. Before embedment in wood shavings or similar material the parts

must be packed in a dustproof package (for instruments the use of a plastic

bag is essential). If open assemblies are included that are sensitive to elec-

tromagnetic voltages (e. g. data interfaces, etc.) then these must be returned

in the associated original protective packaging (e. g. conductive protective

bag). (Exception: assemblies with a built-in voltage source belong in non-

conductive protective packaging).

For damage which arises as a result of non-compliance with these instruc-

tions no warranty responsibility whatsoever will be accepted by Metrohm.

847 USB Lab Link / Lab Link Server

41

Advertising