Metrohm 847 Lab Link - Manual (Page 38)

3 Operation
3.4 Breaking and remaking connections
Each existing connection that has the status connected can be broken
manually with Connection / Disconnect and then has the status not con-
nected (for connections without Auto connect) or not available (for connec-
tions with Auto connect).
As soon as you switch on the Touch Control with 847 USB Lab Link again
the connection will be automatically reestablished.
3.5 Remote service
The Lab Link Server offers a remote service function with which all connected
Titrando systems can be remotely controlled directly from the server. This al-
lows service technicians to service your system even though they are not
present on site.
This is done by transferring the display of the Touch Control directly to the
desktop of the Lab Link Server. A precondition for this is that the correspond-
ing 847 USB Lab Link is correctly connected to both the Titrando system and
the network, and that a communication connection to the Lab Link Server ex-
ists.
1. Mark the connection of the 847 USB Lab Link that you want to control
remotely.
2. Use Connection / Remote Control to open the control window. You
can show the Touch Control display in the original size or twice as large
(double size).
A double-click directly on the connection also opens the Remote control
window.
34 847 USB Lab Link / Lab Link Server