17 sample preparation module (spm), 1 connecting the sample preparation module (spm), Connecting the sample preparation module (spm) – Metrohm 940 Professional IC Vario ONE/SeS/Prep 3 User Manual
Page 38: Figure 6, Spm connection capillaries
4.17 Sample preparation module (SPM)
■■■■■■■■■■■■■■■■■■■■■■
30
■■■■■■■■
940 Professional IC Vario ONE/SeS/Prep 3 (2.940.1430)
4.17
Sample preparation module (SPM)
4.17.1
Connecting the sample preparation module (SPM)
The three inputs and outputs of the suppressor units, numbered with 1, 2
and 3 on the connecting piece, each have 2 fixed mounted PTFE capilla-
ries.
Figure 6
SPM connection capillaries
1
out
Output capillary for the sample.
2
in
Input capillary for the sample.
3
regenerant
Input capillary for the regeneration solution.
4
waste reg.
Output capillary for the regeneration solu-
tion; to the waste container.
5
waste rins.
Output capillary for the rinsing solution; to
the waste container.
6
rinsing solution
Input capillary for the rinsing solution.
Connect the PTFE capillaries firmly mounted on the connecting piece to
the other components of the IC system as follows: