Metrohm MagIC Net Empower Driver - Manual (Page 17)

▪▪▪▪▪▪▪ 15
3.2 System selection
1. Select an instrument from the Available Instruments list and drag it to the list beneath New
System Instruments. You can use instruments from the Unused Components and an
existing system. If the instrument is not in the Available Instruments list, click on Cancel
and check the properties of the acquisition server.
Note: Several IC systems cannot be controlled with one chromatographic system; two
different systems are required for this (see Chapter 11).
2. Click on Next.
Note: You cannot drag the last instrument from an existing system. To free up the last
instrument, delete the system.