3 setting the parameters for the dosino, 3 creating the time program of the method, Setting the parameters for the dosino – Metrohm MagIC Net Empower Driver User Manual
Page 29: Creating the time program of the method
Advertising
▪▪▪▪▪▪▪
27
5.2.3
Setting the parameters for the Dosino
Note: The dosing devices (Dosinos) have to be connected to the instrument before the system is set
up, because they are not plug-and-play devices.
Dosino default settings normally do not require any modification.
5.3
Creating the time program of the method
Write a time program to set the chronological order of the action of your measurement.
Commands can be selected with Add….
Advertising