BT 250 - Manual (Page 14)

Setting up
If you experience any problems, please call the Helpline on Freephone 0808 100 6554* or visit www.bt.com/producthelp
14
3. Place the Parent unit into the charger. The red
charging light will illuminate on the charger and
the battery icon will start scrolling on the Parent
unit display to indicate that the batteries are
being charged.
BT Baby Monitor
Leave the batteries to charge for 16 hours to reach
maximum charge. When the batteries are fully
charged the battery icon on the display will show a
full charge
.
The Parent unit rechargeable
batteries will lose charge over
a period of time, even if
switched off.
Battery low warning –
Parent unit
When the batteries are low –
approximately within 1 hour of
running out – the Parent unit
will emit a low battery alert,
the low battery indicator will
turn red, the display will show
Low Battery
and the icon
will flash. Place the Parent unit
back on the charger to charge
the batteries. To speed up
the charging process turn the
Parent unit off when charging
if it’s not being used.
You can still use your Parent
unit to monitor your baby
even when the batteries are
low, provided it remains in the
charger cradle to re-charge
the batteries.
Charging light
Battery icon
Low battery indicator