BT 250 - Manual (Page 19)

If you experience any problems, please call the Helpline on Freephone 0808 100 6554* or visit www.bt.com/producthelp
Using your BT Digital Baby Monitor 250 19
If you try and set the volume
higher or lower than the 5
settings available on either unit
you will hear an error tone.
Setting the Parent unit to
Volume off
is the equivalent of
switching the Mute All feature
on. See page 20 for more
information.
The default loudspeaker volume
on both units is Level 3.
Adjust the loudspeaker volume
At the Parent unit:
1. Press or to select the required level.
The first press will show and sound the current
setting. There are 5 volume levels and off (Mute).
The volume level will be heard and shown on the
display at each press, e.g. Level 3 is shown as
Volume .
If you wish to switch the volume off, keep pressing
until the display shows Volume Off. The Mute
All indicator will illuminate.
At the Baby unit:
There are 5 volume settings.
1. When Music is being played or Talk back is in
progress from the Parent unit, press the or
button to adjust the volume.
2. If no music or Talk back is in use, pressing the or
buttons will adjust the volume and a beep will
sound at the appropriate volume level set.