BT 250 - Manual (Page 28)

Using your BT Digital Baby Monitor 250
If you experience any problems, please call the Helpline on Freephone 0808 100 6554* or visit www.bt.com/producthelp
28
The timer can be set to
countdown from 1 minute to 99
hours 59 minutes.
The feed timer default
countdown duration is set at
02:00 (2 hours).
If the Parent unit is switched
off, the feed timer countdown
will be cancelled and you will
need to start it again when the
unit is switched back on. The
duration, alert type and repeat
settings will still be retained.
Feed Timer
You can set a Feed Timer on the Parent unit to act as
a countdown timer that will alert you when you next
need to feed your baby. You have a choice of alert
types (beep, beep & vibe and vibrate) and you can
set the timer to repeat itself once the alert sounds.
Set the feed timer countdown duration
1. Press . Nightlight is displayed, press
until Feed Timer is displayed and press .
2. Start? is displayed, press to display
Duration and press
.
3. The display will show 00h:00m (or the currently set
timer). Use the and buttons to select the
first digit and press . Repeat this procedure for
each digit and press .
The display will show Saved and you’ll hear a
confirmation beep.