BT 250 - Manual (Page 15)

If you experience any problems, please call the Helpline on Freephone 0808 100 6554* or visit www.bt.com/producthelp
Setting up 15
Baby unit
1. Plug the remaining power adapter cable into the
socket marked on the back of the Baby unit
and plug the other end into the mains power and
switch on.
Switch on and link the Parent and Baby units
1. Press and hold the button on the Baby unit for
1 second. The nightlight will briefly illuminate and
then the green Link indicator will flash.
2. Press and hold the button on the Parent unit
until all the LEDs on the unit briefly illuminate. The
green Link indicator will flash and the display will
show I’m Linking.
WARNING
Never use non-rechargeable
batteries in the Parent unit.
Only use the recommended
type – 2 x AA NiMH 1300mAh
batteries. Using other types
could permanently damage the
unit. Charge the batteries as
instructed in this user guide.
The Parent unit can still be used
when it is in the charger.
Removing the batteries
If you ever need to remove
the batteries, simply slide
open the battery compartment
cover and use the ribbon to
eject the batteries.